simple description:The dehumidifying dryer combine a dehumidifying and drying system in a single unit.They have many applications in processing plastic materials such as PA,PC,PBT ,PET,etc. honeycomb rotors ,under ideal conditions,can supply dehumidified dry air with a dew-point down to -40 and -50.
weight :310.00
unit weight:KG
characteristic:For Plastic Material Drying
patent:Intelligent Drying System Control Software
manufacturer:HENGJU
Producing country:CHINA
Product alias:All-in-One Dehumidifying Dryer
3 in 1 Dehumidifier Dryer Product introduction
3 in 1 Dehumidifier Dryer parameter
Model
HCF-8075
Dryer Hopper
Capacity (KG)
75
Heat Protection Material
Fiberglass+Staninless Steel
Dry-Air Dew point
-35℃ to -45℃
Temperature (℃)
80-180
Air Flow (m^3/h)
80
Blower Power (KW)
0.75
Regeneration Blower (KW)
0.25
Drying Heater (KW)
4.2
Regeneration Heater (KW)
3.8
Pipe Sizes
Drying (mn)
51
Cooling (lnch)
3/4"
Regeneration (mn)
38
Conveying Blower (KW)
0.75
Conveying Distance (m)
Stage 1
6-10
Stage 2
6-10
Hose Size (Inch)
1.5
Sensor Hopper Capacity (L)
7.5
Vacuum Hopper Capacity (L)
7.5
Dimension LxWxH (cm)
100×87×180
Approx.Net Weight (KG)
310
Remark: Compressed air Pressure must more than 0.4MPa,air flow more than 15L/H; We reserve the right to change spencifications without prior notice.
All-in-One Dehumidifying Dryer
3 in 1 Dehumidifier Dryer Equipment principle
All-in-One Dehumidifying Dryer
3 in 1 Dehumidifier Dryer application
In the production process of plastic products, the moisture problem bothers all processors. The rotary dehumidifier is widely used for drying all kinds of plastics, especially engineering plastics with strong hygroscopicity (such as PA, PC, PBT, PET, etc.) for high-efficiency dehumidification.
All-in-One Dehumidifying Dryer
3 in 1 Dehumidifier Dryer Precautions
1, please carry out electrical construction in accordance with the "Electrical Equipment Standards", "Inner Line Regulations" and this operating manual. 2, please do not use the power supply other than that specified. 3, please complete the specified grounding project. (Yellow power cord) 4, please fasten the connector and connecting terminal of the machine body and measuring wire. 5, before the line test, the power must be cut off, and the voltage will be measured with a multimeter after 10 minutes to ensure safety before the test. Product alias:
163.com