simple description:3-in-1 machine is mainly used for engineering plastics with strong hygroscopicity such as PA, PC, PBT, PET, ABS, etc. for efficient dehumidification dryer operation, and is connected with hot air hopper dryer.
weight :340.00
unit weight:KG
characteristic:For Plastic Material Drying
patent:Intelligent Drying System Control Software
manufacturer:HENGJU
Producing country:CHINA
Product alias:3-in-1 machine
All-in-One Machine Product introduction
All-in-One Machine parameter
Model
HCF-120100
Dryer Hopper
Capacity (KG)
100
Heat Protection Material
Fiberglass+Staninless Steel
Dry-Air Dew point
-35℃ to -45℃
Temperature (℃)
80-180
Air Flow (m^3/h)
120
Blower Power (KW)
1.1
Regeneration Blower (KW)
0.375
Drying Heater (KW)
6.2
Regeneration Heater (KW)
3.8
Pipe Sizes
Drying (mn)
51
Cooling (lnch)
3/4"
Regeneration (mn)
38
Conveying Blower (KW)
0.75
Conveying Distance (m)
Stage 1
6-10
Stage 2
6-10
Hose Size (Inch)
1.5
Sensor Hopper Capacity (L)
7.5
Vacuum Hopper Capacity (L)
7.5
Dimension LxWxH (cm)
100×87×180
Approx.Net Weight (KG)
340
Remark: Compressed air Pressure must more than 0.4MPa,air flow more than 15L/H; We reserve the right to change spencifications without prior notice.
3-in-1 machine
All-in-One Machine Equipment principle
3-in-1 machine
All-in-One Machine application
In the production process of plastic products, the moisture problem bothers all processors. The rotary dehumidifier is widely used for drying all kinds of plastics, especially engineering plastics with strong hygroscopicity (such as PA, PC, PBT, PET, etc.) for high-efficiency dehumidification.
3-in-1 machine
All-in-One Machine Precautions
1, the door of the control box must not be opened at will during the power-on process. 2, it is forbidden to touch the machine body, control part and other accessories with wet hands. 3, please do not damage the wire, do not put pressure on the wire, do not place heavy objects on the wire, and do not pinch the wire. May cause electric shock. 4, wiring and inspection work should be performed by professional technicians. 5, when you need to disassemble the machine for inspection and cleaning, please cut off the power supply and compressed air source first. Product alias:
163.com