Water type Mold Temperature Controller Details description
product name：Water type Mold Temperature Controller
release time:2020-06-03 11:22:38
Numbering:HJW-122024
Brand:HENGJU
Price:￥variable
simple description:Mold temperature controller is widely used in plastic production industry.
weight :80.00
unit weight:KG
characteristic:For adjusting mold temperature
patent:Mold temperature controlling
manufacturer:HENGJU
Producing country:CHINA
Product alias:MTC
Water type Mold Temperature Controller Product introduction
Water type Mold Temperature Controller parameter
Model
HJW-122024
Transter Medium
water
Temp.Range
35℃-120℃
Pump (HP)
2
Pump Flow (L/min)
110
Heating Power (KW)
24
Inlet/Outlet Diameter
3/8'' 4inltes 4 outlets
Cooling Method
Direct cooling
Dimension(mm)
800*330*750
Net Weight(KG)
80
MTC
Water type Mold Temperature Controller Equipment principle
MTC
Water type Mold Temperature Controller application
Mold temperature controller is widely used in plastic production industry. And by using MTC, customers can get: 1.Improve the molding efficiency of the product; 2. Reduce the production of defective products; 3. Improve the appearance of the product and suppress the defects of the product; 4. Speed up production progress, reduce energy consumption and save energy.
MTC
Water type Mold Temperature Controller Precautions
1. Please check the cooling water circulation before use to prevent damage to the mold temperature machine due to insufficient cooling water. We must keep the working environment of the mold temperature machine clean from dust, which can greatly extend the service life of the electrical components. 2. For new MTC, we need to make different maintenance measures according to the heat conduction medium. If the medium is water, we must keep the water source clean, so that it is not easy to scale, and it can also prevent the pipeline from being blocked. For oil medium, we need to replace it regularly according to the use temperature. For the temperature above 200 ℃, we need to replace it once a month or two, and below 200 ℃, we can replace it once a quarter or so, which is very good It avoids the problem that the temperature cannot be increased. 3. As for pipeline, we should judge whether the pipeline is blocked according to the connection between pump and pressure. If the pressure is too low, we can take out the heating pipe and clean it with tools, especially the filter mesh at the entrance of the system. It is best to clean the hood once a month. Product alias:
163.com